TV set-top box remote control setting – how to dock with TV remote control

With the continuous development of TV technology, electronic and digital products are becoming more and more high-tech and intelligent. Nowadays, almost every family uses digital TV, satellite TV or Internet TV, so the TV set-top box remote control is essential. Each TV is equipped with a set-top box remote control, which cooperates with the TV remote control to complete various operations of TV functions. However, many people do not know how to set up the remote control of the TV set-top box, nor how to connect with the TV remote control to realize the functions of the TV and the set-top box. The following small series will teach you how to set up the remote control of the set-top box step by step.

The method and steps of setting the TV set-top box remote control:

The TV set-top box remote control mainly learns the main buttons of the TV part, as shown in the following figure:

1. Press and hold the “Settings” button, let the indicator light brighten from normal brightness, keep it on, and then release the button;

2. Align the learning remote control with the remote control window of the TV remote control (the front end of the remote control) and keep within a distance of 3-10 cm, as shown in the figure below:

3. Use the TV to switch the signal source (that is, the button that is usually used to switch signal sources such as ordinary channels and DVD) as an example:

Press the TV remote control source switch button for about two seconds. The light flashes quickly when a signal is received. After receiving successfully, the indicator light will flash three times, then it will be on for a long time, then press the set-top box remote control “TV/AV” to press the button, the indicator light will flash three times, and then the time is complete to learn the button. You can continue to use the same way to use the power of the set-top box remote control. Volume +. Volume One. L.S2.S The corresponding buttons on the TV set one by one

4. After learning, press the “Settings” button to turn off the indicator light, the remote control can control the function operation of the set-top box, and you can also use some common functions of the TV, see the table below for details:

Key Name Common Functions

The custom learning button is customized by the customer as a TV remote control button

Set switching and set the learning zone button function

Power learning button to realize TV/OFF function

TV volume key learning button, adjust TV volume

TV/AV is used to switch the signal source switching button of common channel, set-top box, DVD and other signal sources

S1, S2, S other TV remote control buttons you want to use

Precautions for setting the TV set-top box remote control:

1. When setting the remote control of the TV set-top box, the two remote controls must be kept stable and cannot shake;

2. When setting the remote control of the TV set-top box, the transmitters of the two remote controls should be on the same straight line, and the distance should be within 3-10 cm;

3. If the setting function of the TV set-top box remote control is not selected within 14 seconds after it is turned on, it will automatically exit the learning state. If there is no learning within 14 seconds after selecting the button, it will automatically exit the learning state;

4. When the set-top box remote control learns the selection key and waits for the signal to be received, press the setting key to exit the learning function.

TV set-top box installation:

1. Connect the red, white, and yellow A’s to one end of the AV jack on the back of the set-top box, insert them according to the color, and insert the other end into the AV input on the back of the TV (Note: Insert the input hole, you can’t see anything when you insert the output).

2. Insert one end of the original TV into the signal line (that is, coaxial cable) on the wall panel, do not move the part on the wall, unplug the TV end and insert it into the set-top box for signal input (note: the signal input hole, or part of the brand name input for video, which must be entered anyway).

3. Insert the smart card into the card slot, be sure to see the chip rushing down, and insert it firmly.

4. You can turn on the set-top box and TV, and first use the remote control of the original TV to adjust the TV to the video state (that is, the state of the original TV DVD).

5. The rest is to wait for the authorization, and you can watch it when the authorization arrives.