How to repair samsung led tv remote?

1. How to check the failure of samsung led tv remote.

1. Check whether the battery is normal.

Generally, TV remotes run on batteries, so if the remote fails, it’s likely to be battery related. First check the battery, then unplug the battery, then clean the copper sheet on the power contact point of the remote control, and reinstall it. If the battery has been used for a period of time, consider replacing it with a new one.

china led tv remote

2. Check if it is aimed at the TV and there is no blockage.

If the power supply is good, but the remote control still does not work, what should I do? At this time, you may need to check whether there is any obstruction between the TV and the remote control, or whether to point the TV at the TV when operating. In general, bluetooth remotes are slightly better than infrared remotes because of the angle limitations of the latter.

3. Check the inside of the remote control for dust accumulation.

In addition to the above three reasons, if the remote control does not respond suddenly, it may also be due to the excessive dust accumulated inside and cause insensitivity. In this case, you might as well be a good user and help the remote control to “clean the whole body”. Take it apart first, remove the dust with alcohol cotton balls and a hair dryer, then it can be used normally!

2. Check the dust accumulation of the samsung led tv remote.

china led tv remote control

Step 1: Open the remote control with a screwdriver;

Step 2: Then, use a hair dryer (preferably cold air) to blow off the dust;

Step 3: Finally, wipe off the remote control with a cotton ball or swab dipped in alcohol until the whole body is cleaned.

Note: don’t press too hard and don’t press, just swipe.

3. What should I do if the remote control of the Samsung TV fails?

1. Many smartphones have infrared functions. If your mobile phone has an infrared function, you can install the [Remote Control Wizard] software, and you can change the remote control in seconds. When there is no remote control, it is most convenient to use a mobile phone with infrared function!

2. It can also be manipulated on mobile phones that do not have infrared functions. But you need to use the relevant remote control APP, this method can only be used for smart TV.

tv remote control

Ordinary smart TVs will automatically connect to WIFI when they are in use. At this time, as long as the mobile phone is connected to the same WIFI, and then the APP is opened, the application will automatically search for devices supported by the WIFI network, and generally they can be successfully matched. If it is really impossible to automatically match through the search, you can also set it manually, and there are corresponding tutorials in the application.

If the remote control still does not respond after the above operations, then there may be a real problem with your remote control. What should you do in this situation?

Because this method requires relying on WIFI, it may not be sensitive and stable enough. But it is not limited by the distance to use, and it can be operated without facing the TV, which is very convenient.

3. If your TV is not connected to WIFI, you can also use the mouse to operate. Smart TVs generally use an Android-based system. Insert a wireless mouse into the USB port of the TV, and the mouse pointer will appear on the screen, and the user can click as he pleases.

Under normal circumstances, right-clicking the mouse is “OK”, right-clicking is “Return”, and holding down the left mouse button can drag the screen, which is similar to touch-screen operation, but it seems useless.

Leave a Comment

Your email address will not be published. Required fields are marked *