KGL · Heating appliance controls · B2B OEM / ODM
KGL2015
Electric Heater Remote Control
Separate upper and lower heating commands, a clear LCD panel and nine silicone keys. Designed for matched dual-zone heaters, infrared heating tables and radiant foot-warming systems.
9 keys · AAA × 2 · 140 × 58 × 22 mm

01 / Product views
A closer look at the controls.




02 / Technical parameters
Specifications for appliance integration.
| Model | KGL2015 |
|---|---|
| Product | Electric heater remote control with LCD |
| Keys | 9 silicone keys in a 3 × 3 arrangement |
| Housing | ABS; black sample finish |
| Dimensions | 140 × 58 × 22 mm (length × width × thickness); supplied as 58 × 140 × 22 mm |
| Battery | AAA × 2; inclusion agreed in the order |
| Stated range | Greater than 18 m according to the supplied brief; verify with the matched receiver and installation conditions |
| Sample transmission | Protocol and frequency are not confirmed in the supplied specification |
| Functions | OFF, LOCK, ON, UPPER +/−, LOWER +/−, ECO and TIMER |
| Display | LCD with power/lock indicators and divided status fields; active readouts depend on approved firmware |
| Applications | Matched dual-zone electric heaters, infrared heating tables, radiant panels and foot warmers |
| OEM / ODM | Logo, English legends, color, functions, structure and receiving-end protocol, subject to project evaluation |
Matching appearance or frequency alone does not establish compatibility. The listed range is a supplier-provided specification, not an independently verified test result.
03 / Controls
Direct access to each heating zone.
Upper and lower zones
Separate + and − keys send upper-zone and lower-zone adjustment commands. The receiving controller determines the available levels and heating behavior.
Distinct power commands
Two red keys distinguish OFF from ON. The central LOCK key provides a dedicated lock command for compatible control systems.
ECO and timing
Dedicated ECO and TIMER keys give quick access to the appliance’s supported modes. Countdown options and energy-saving logic follow the approved firmware.
The electric heater remote control sends commands; heater safety interlocks, thermal cutoffs and protection remain the responsibility of the appliance system.
04 / Dual-zone application
Comfort at the table.
This electric heater remote control can be developed for matched infrared heating tables and dual-zone appliances. Confirm how the upper and lower circuits respond before approving samples.

05 / LCD and lock
A familiar control layout.
The LCD layout and nine-key matrix remain based on the supplied product. English legends use the same command map across the visual set. A lock command does not imply a certified child-safety system.

06 / Everyday access
Keep heating commands close.
For compatible radiant foot warmers and desk-side heating systems, the electric heater remote control puts ECO, timing and zone commands within reach. Scene appliances are illustrative application context, not included accessories.

07 / Timer application
Define the operating window.
Use TIMER and ECO commands with the matched appliance controller. Timer choices, ECO behavior and permitted operating conditions are confirmed in development.

08 / Custom development
Your appliance. Your controls.
Customize the electric heater remote control with approved English artwork, brand identity, command codes and LCD states. Review communication and receiving-end requirements before sample approval.

09 / Source manufacturer
From requirements to production.
Shenzhen Keguanglong Technology Co., Ltd. (KGL) is a China-based remote control manufacturer with 18 years of remote control manufacturing experience. We serve appliance manufacturers, brands, importers, distributors and project buyers through B2B custom development and bulk production.
Our OEM/ODM scope covers appearance and structural design, PCB hardware, firmware, protocol matching, tooling, injection molding, assembly, inspection and packaging. These are factory capabilities; the communication configuration of this sample still needs confirmation.






10 / OEM and ODM
Build the command map around your heater.
Send the receiving controller or appliance sample, protocol, key functions, LCD content, desired artwork and target quantity.
Confirm power commands, zone levels, lock behavior, ECO logic, timer options and display states. Review the enclosure, English legends, logo and packaging.
Evaluate the electric heater remote control with the actual receiving device. Check command response, range, display behavior and appearance.
Produce and inspect against the functional and appearance requirements confirmed by both parties. Commercial terms follow the approved configuration and order.
11 / Sourcing FAQ
Before placing an order.
Is this electric heater remote control universal?
No. The protocol, command codes and receiving-end behavior must match. Provide the exact heater controller or a working sample for evaluation.
Does this sample use IR, RF or Bluetooth?
The supplied brief does not identify the sample protocol. KGL can evaluate communication options for an OEM project, but that does not establish this sample’s transmission type. Through-wall operation is not claimed.
Can the display and legends be customized?
Yes, subject to engineering review. These visuals show English legends and no product logo. Final production artwork and LCD configuration require approval; a display redesign may require tooling changes.
What does the lock key do?
It sends the matched system’s lock command. The precise locking behavior and safety validation must be defined with the appliance manufacturer.
What are the MOQ and sample timing?
Quantity, sample timing and tooling requirements are agreed after reviewing the configuration, receiving device, artwork and destination.
What is included?
Package contents and batteries are agreed in the order. Heating tables, desks, warmers and other scene equipment are not included.
12 / B2B customization
Send the heater.
Define the controls.
For electric heater remote control customization, send product photos, a function list, receiving-end details and target quantity.
OEM / ODM and bulk production · B2B only





