IR infrared remote control receiver

Ir infrared remote control receiver installation method:
1. Use double-sided tape to stick the receiver in the desired position.
2. Paste the transmitter head of the infrared device you want to control
Reminder: Set-top boxes (or other devices that require remote control) must be placed in a place where your remote control cannot be directly controlled. Otherwise, the remote control signal and the forwarded remote control signal will be sent to the set-top box at the same time. The signals are out of sync and will interfere with each other, causing them to not work properly! Instructions for use of the universal receiver: 1. Insert the “USB plug” into the set-top box, TV, mobile phone charger, etc. (this product uses 5V power supply). 2. Point the “transmitter” to the receiving window of the set-top box, receiver, DVD, etc. that need remote control (some devices will be marked with R, IR, IRF, etc.).
3. Place the “receiver” in a suitable position for the remote control to receive. Installation method: The installation is very simple: Place the transmitter near the remote control receiving window of the electrical appliance; Paste the receiver in a position where it is easy to receive the remote control signal (the receiver should face the transmitter direction of the remote control, and the direction is too large to affect the receiving effect); Finally, plug it in The power supply is ready to use.