Projection universal remote control how to set?
The projector remote control is an important tool for controlling the projector, which allows us to easily adjust the Settings of the projector without having to go to the machine every time. Here are the steps on how to set up your projector remote control to make sure it works properly:
- Power on and pairing: First, make sure the projector is powered on and turned on. Next, install the battery of the remote control correctly. Place the remote control within 10cm of the projector body and hold down the [Home button] + [Back button] at the same time. When the indicator flashes quickly and the projection screen prompts “Remote control connected”, you can release the button, indicating that the pairing is successful.
- Volume adjustment: Use the function switch at the bottom of the remote control to switch to the “Vol” side, and then adjust the volume through [+ key] and [- key].
- Focus: Turn the function switch at the bottom of the remote control to the “focus” side, use [+ key] and [- key] to focus and adjust the clarity of the picture.
- Indicator function: On the “Focus” side, if the indicator is steady on, you can turn it to the left to turn it off. If the indicator blinks orange quickly when you press the button, the battery is low. If the charging model is bright red, it means that it is charging.
- Remote control failure treatment: If the remote control battery power is insufficient, you can replace the new battery. If the remote control and the projector are out of contact, you can re-pair the remote control and hold down the [Home button] + [Back button] of the remote control until the orange light flashes quickly.
Mobile remote control: If the projector supports, you can download the corresponding APP in the mobile phone, such as “Ji Mi APP”, and ensure that the mobile phone and the projector are located under the same wireless network. After opening the APP, search for the projection device and connect it. After the connection is successful, click the remote control in the shortcut tool, select the button mode, the mobile phone will appear the remote control page, you can carry out different operations.
- Daily use: When using the projector remote control, you can use it by pressing the pairing button of the remote control to complete the pairing connection. Usually, this requires placing the remote close to the projector and pressing the menu key and home key at the same time, letting go after the drip and waiting for the connection to complete.
- Precautions: If you encounter problems during use, you can refer to the remote control manual or the projector user manual to operate. If the remote control can not be used, the battery may be out of power, please replace the battery; It could also be that the Bluetooth connection to the remote control or projector is faulty and needs to be restarted and re-paired.